Millimeters to Picas Converter
Enter the length in millimeters below to convert it to picas.
Convert Millimeters to Picas
Enter a value in millimeters (mm) to convert to picas (pc).
Millimeters to Picas Conversion Chart (1–40 Continuous)
Continuous 1 to 40 millimeters lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Millimeters (mm) | Decimal (pc) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 mm★ Common | 0.23622 pc | 15/64 pc | 1/4 pc |
2 mm★ Common | 0.472441 pc | 15/32 pc | 1/2 pc |
3 mm★ Common | 0.708661 pc | 45/64 pc | 11/16 pc |
4 mm | 0.944882 pc | 15/16 pc | 15/16 pc |
5 mm★ Common | 1.181102 pc | 1 3/16 pc | 1 3/16 pc |
6 mm★ Common | 1.417323 pc | 1 27/64 pc | 1 7/16 pc |
7 mm | 1.653543 pc | 1 21/32 pc | 1 5/8 pc |
8 mm★ Common | 1.889764 pc | 1 57/64 pc | 1 7/8 pc |
9 mm | 2.125984 pc | 2 1/8 pc | 2 1/8 pc |
10 mm★ Common | 2.362205 pc | 2 23/64 pc | 2 3/8 pc |
11 mm | 2.598425 pc | 2 19/32 pc | 2 5/8 pc |
12 mm★ Common | 2.834646 pc | 2 53/64 pc | 2 13/16 pc |
How to Convert Millimeters to Picas
To convert millimeters to picas, multiply the length by the following conversion ratio: 0.2362205 picas/millimeter.
Since one millimeter is equal to 0.2362205 picas, you can use this simple formula to convert:
The length in picas is equal to the length in millimeters multiplied by 0.2362205.
For example, here's how to convert 5 millimeters to picas using the formula above.
How Many Picas Are in a Millimeter?
There are 0.2362205 picas in a millimeter, which is why we use this value in the formula above.
Our millimeter fraction and decimal calculator can convert millimeters and picas, and it automatically converts the results to US customary, imperial, and SI metric values.
Millimeters and picas are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Millimeters to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 0.19685 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 5 millimeters (mm) into fractional inches:
- Find the decimal inches result: Convert 5 mm to inches to get 0.19685 in.
- Separate the whole inches from the decimal part: Keep the whole number 0 aside, leaving the decimal remainder 0.19685.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0.19685 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Millimeter?
A millimeter is a metric unit of length equal to one-thousandth (1/1,000) of a meter or one-tenth (1/10) of a centimeter. By international definition, there are exactly 25.4 millimeters in one inch. [1]
The millimeter, or millimetre, is a standard SI metric unit of length. Millimeters can be abbreviated as mm; for example, 1 millimeter can be written as 1 mm.
In the metric system, "milli" is the prefix for thousandths, or 10⁻³. Millimeters are the default unit on mechanical engineering drawings and architectural blueprints worldwide.
Millimeters are commonly measured using metric steel rules, digital vernier calipers, depth gauges, and micrometers in CNC machining, 3D printing, automotive fasteners, and precision manufacturing.
What Is a Pica?
A pica is a unit of length equal to 0.0042333 meters (m), the base unit for length. Typographical unit equal to 12 points or 1/6 of an inch (4.2333 mm). [2]
The pica is classified as a standard unit of length. Picas can be abbreviated as pc; for example, 1 pica can be written as 1 pc.
When working with picas (pc) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, picas (pc) are widely used across fine-tolerance laboratory, analytical, and micro-scale length measurements within international standard workflows, engineering documentation, and technical data sheets.
When converting length between millimeters (mm) and picas (pc), keep full floating-point precision (1 mm = 0.2362205 pc; 1 pc = 4.2333333 mm) during intermediate calculations and round only the final pica figure to match your instrument tolerance.
More Millimeter & Pica Conversions
Need to calculate in the opposite direction? Use our picas to millimeters calculator to switch your starting unit immediately. You can also explore related tools such as converting picas to millimeters, converting millimeters to inches, or converting millimeters to meters.
Convert from Millimeters
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Millimeters (mm) to Picas (pc)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Millimeter (mm) & Pica (Typography) (pc)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (mm to pc)