Yards to Feet Converter
Enter the length in yards below to convert it to feet.
Convert Yards to Feet
Enter a value in yards (yd) to convert to feet (ft).
Yards to Feet Conversion Chart (1–40 Continuous)
Continuous 1 to 40 yards lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Yards (yd) | Decimal (ft) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 yd★ Common | 3 ft | 3 ft | 3 ft |
2 yd★ Common | 6 ft | 6 ft | 6 ft |
3 yd★ Common | 9 ft | 9 ft | 9 ft |
4 yd | 12 ft | 12 ft | 12 ft |
5 yd★ Common | 15 ft | 15 ft | 15 ft |
6 yd★ Common | 18 ft | 18 ft | 18 ft |
7 yd | 21 ft | 21 ft | 21 ft |
8 yd★ Common | 24 ft | 24 ft | 24 ft |
9 yd | 27 ft | 27 ft | 27 ft |
10 yd★ Common | 30 ft | 30 ft | 30 ft |
11 yd | 33 ft | 33 ft | 33 ft |
12 yd★ Common | 36 ft | 36 ft | 36 ft |
How to Convert Yards to Feet
To convert yards to feet, multiply the length by the following conversion ratio: 3 feet/yard.
Since one yard is equal to 3 feet, you can use this simple formula to convert:
The length in feet is equal to the length in yards multiplied by 3.
For example, here's how to convert 100 yards to feet using the formula above.
How Many Feet Are in a Yard?
There are 3 feet in a yard, which is why we use this value in the formula above.
Our yard fraction and decimal calculator can convert yards and feet, and it automatically converts the results to US customary, imperial, and SI metric values.
Yards and feet are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Yards to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 3600 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 100 yards (yd) into fractional inches:
- Find the decimal inches result: Convert 100 yd to inches to get 3600 in.
- Separate the whole inches from the decimal part: Keep the whole number 3600 aside, leaving the decimal remainder 0.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Yard?
A yard is a unit of length equal to 0.9144 meters (m), the base unit for length. Imperial unit equal to 3 feet or 36 inches (0.9144 meters). [1]
The yard is classified as a US customary and imperial unit of length. Yards can be abbreviated as yd; for example, 1 yard can be written as 1 yd.
One yard is defined as exactly 3 feet or 36 inches, and is legally anchored by international treaty as 0.9144 meters.
In practice, yards (yd) are widely used across standard length applications within US customary and imperial workflows, engineering documentation, and technical data sheets.
What Is a Foot?
A foot is a US customary and imperial unit of length equal to 12 inches or 1/3 of a yard. Under the 1959 International Yard and Pound Agreement, one foot is legally defined as exactly 0.3048 meters (30.48 centimeters). [2]
Feet are widely used in the United States, Canada, and the United Kingdom for human height, building construction, real estate floor plans, and aviation altitude. Feet can be abbreviated as ft; for example, 1 foot can be written as 1 ft.
Feet can also be denoted using the ′ symbol, known as a prime (or a single quote ' for convenience). For example, 5 feet 10 inches is frequently written as 5′ 10″ or 5' 10".
Feet are measured using 12-inch rulers, carpenter's folding rules, 25-foot steel tape measures, and laser distance meters across residential framing, architecture, and surveying.
When converting length between yards (yd) and feet (ft), keep full floating-point precision (1 yd = 3 ft; 1 ft = 0.3333333 yd) during intermediate calculations and round only the final foot figure to match your instrument tolerance.
More Yard & Foot Conversions
Need to calculate in the opposite direction? Use our feet to yards converter (ft to yd) to switch your starting unit immediately. You can also explore related tools such as converting meters to feet, converting inches to feet, or converting yards to meters.
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Yards (yd) to Feet (ft)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Yard (yd) & Foot (ft)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (yd to ft)