Points to Meters Converter
Enter the length in points below to convert it to meters.
Convert Points to Meters
Enter a value in points (pt) to convert to meters (m).
Points to Meters Conversion Chart (1–40 Continuous)
Continuous 1 to 40 points lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Points (pt) | Decimal (m) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 pt★ Common | 0.000353 m | 0 m | 0 m |
2 pt★ Common | 0.000706 m | 0 m | 0 m |
3 pt★ Common | 0.001058 m | 0 m | 0 m |
4 pt | 0.001411 m | 0 m | 0 m |
5 pt★ Common | 0.001764 m | 0 m | 0 m |
6 pt★ Common | 0.002117 m | 0 m | 0 m |
7 pt | 0.002469 m | 0 m | 0 m |
8 pt★ Common | 0.002822 m | 0 m | 0 m |
9 pt | 0.003175 m | 0 m | 0 m |
10 pt★ Common | 0.003528 m | 0 m | 0 m |
11 pt | 0.003881 m | 0 m | 0 m |
12 pt★ Common | 0.004233 m | 0 m | 0 m |
How to Convert Points to Meters
To convert points to meters, multiply the length by the following conversion ratio: 0.000352778 meters/point.
Since one point is equal to 0.000352778 meters, you can use this simple formula to convert:
The length in meters is equal to the length in points multiplied by 0.000352778.
For example, here's how to convert 5 points to meters using the formula above.
How Many Meters Are in a Point?
There are 0.000352778 meters in a point, which is why we use this value in the formula above.
Our point fraction and decimal calculator can convert points and meters, and it automatically converts the results to US customary, imperial, and SI metric values.
Points and meters are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Points to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 0.069444 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 5 points (pt) into fractional inches:
- Find the decimal inches result: Convert 5 pt to inches to get 0.069444 in.
- Separate the whole inches from the decimal part: Keep the whole number 0 aside, leaving the decimal remainder 0.069444.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0.069444 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Point?
A point is a unit of length equal to 0.000352778 meters (m), the base unit for length. Desktop publishing point equal to 1/72 of an international inch (0.35278 mm). [1]
The point is classified as a standard unit of length. Points can be abbreviated as pt; for example, 1 point can be written as 1 pt.
When working with points (pt) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, points (pt) are widely used across fine-tolerance laboratory, analytical, and micro-scale length measurements within international standard workflows, engineering documentation, and technical data sheets.
What Is a Meter?
The meter (or metre) is the fundamental base unit of length in the International System of Units (SI), officially defined by the BIPM as the length of the path traveled by light in a vacuum during a time interval of 1/299,792,458 of a second. [2]
All metric units of length—from nanometers and millimeters to kilometers—are derived as decimal powers of the meter. Meters can be abbreviated as m; for example, 1 meter can be written as 1 m.
One meter is equal to 100 centimeters, 1,000 millimeters, or approximately 39.3700787 inches (3.28084 feet or 1.09361 yards).
Meters are measured using meter sticks, retractable steel tape measures, laser distance finders, and total station surveying instruments in construction, athletics, physics, and civil engineering.
When converting length between points (pt) and meters (m), keep full floating-point precision (1 pt = 0.000352778 m; 1 m = 2,834.6456693 pt) during intermediate calculations and round only the final meter figure to match your instrument tolerance.
More Point & Meter Conversions
Need to calculate in the opposite direction? Use our meters to points calculator to switch your starting unit immediately. You can also explore related tools such as converting meters to points, converting feet to meters, or converting yards to meters.
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Points (pt) to Meters (m)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Point (Typography) (pt) & Meter (m)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (pt to m)