Nanometers to Angstroms Converter
Enter the length in nanometers below to convert it to angstroms.
Convert Nanometers to Angstroms
Enter a value in nanometers (nm) to convert to angstroms (Å).
Nanometers to Angstroms Conversion Chart (1–40 Continuous)
Continuous 1 to 40 nanometers lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Nanometers (nm) | Decimal (Å) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 nm★ Common | 10 Å | 10 Å | 10 Å |
2 nm★ Common | 20 Å | 20 Å | 20 Å |
3 nm★ Common | 30 Å | 30 Å | 30 Å |
4 nm | 40 Å | 40 Å | 40 Å |
5 nm★ Common | 50 Å | 50 Å | 50 Å |
6 nm★ Common | 60 Å | 60 Å | 60 Å |
7 nm | 70 Å | 70 Å | 70 Å |
8 nm★ Common | 80 Å | 80 Å | 80 Å |
9 nm | 90 Å | 90 Å | 90 Å |
10 nm★ Common | 100 Å | 100 Å | 100 Å |
11 nm | 110 Å | 110 Å | 110 Å |
12 nm★ Common | 120 Å | 120 Å | 120 Å |
How to Convert Nanometers to Angstroms
To convert nanometers to angstroms, multiply the length by the following conversion ratio: 10 angstroms/nanometer.
Since one nanometer is equal to 10 angstroms, you can use this simple formula to convert:
The length in angstroms is equal to the length in nanometers multiplied by 10.
For example, here's how to convert 5 nanometers to angstroms using the formula above.
How Many Angstroms Are in a Nanometer?
There are 10 angstroms in a nanometer, which is why we use this value in the formula above.
Our nanometer fraction and decimal calculator can convert nanometers and angstroms, and it automatically converts the results to US customary, imperial, and SI metric values.
Nanometers and angstroms are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Nanometers to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 0 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 5 nanometers (nm) into fractional inches:
- Find the decimal inches result: Convert 5 nm to inches to get 0 in.
- Separate the whole inches from the decimal part: Keep the whole number 0 aside, leaving the decimal remainder 0.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Nanometer?
One nanometer is equal to one-billionth (1/1,000,000,000) of a meter, which is defined as the distance light travels in a vacuum in a 1/299,792,458 second time interval. [1]
The nanometer, or nanometre, is a multiple of the meter, the SI base unit for length. In the metric system, "nano" is the prefix for billionths, or 10⁻⁹. Nanometers can be abbreviated as nm; for example, 1 nanometer can be written as 1 nm.
Because 1 inch equals 25.4 millimeters and 1 millimeter equals 1,000,000 nanometers, there are exactly 25,400,000 nanometers in 1 inch (and 10 Angstroms in 1 nanometer).
The nanometer is an extremely small unit of length measurement, often used to measure things that are very small, such as the wavelengths of visible light (400 nm to 700 nm), the transistors and electrical pathways in computer processors, and thin-film nanotechnology.
What Is an Angstrom?
An angstrom is a unit of length equal to 1/10,000,000,000 of a meter (1e-10 m). Crystallography and atomic scale unit equal to 0.1 nanometers (10⁻¹⁰ m). [2]
The angstrom is classified as a standard unit of length. Angstroms can be abbreviated as Å; for example, 1 angstrom can be written as 1 Å.
When working with angstroms (Å) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, angstroms (Å) are widely used across fine-tolerance laboratory, analytical, and micro-scale length measurements within international standard workflows, engineering documentation, and technical data sheets.
When converting length between nanometers (nm) and angstroms (Å), keep full floating-point precision (1 nm = 10 Å; 1 Å = 0.1 nm) during intermediate calculations and round only the final angstrom figure to match your instrument tolerance.
More Nanometer & Angstrom Conversions
Need to calculate in the opposite direction? Use our angstroms to nanometers converter (Å to nm) to switch your starting unit immediately. You can also explore related tools such as converting nanometers to inches, converting nanometers to millimeters, or converting centimeters to inches.
Convert from Nanometers
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Nanometers (nm) to Angstroms (Å)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Nanometer (nm) & Angstrom (Å)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (nm to Å)