Miles to Feet Converter
Enter the length in miles below to convert it to feet.
Convert Miles to Feet
Enter a value in miles (mi) to convert to feet (ft).
Miles to Feet Conversion Chart (1–40 Continuous)
Continuous 1 to 40 miles lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Miles (mi) | Decimal (ft) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 mi★ Common | 5,280 ft | 5280 ft | 5280 ft |
2 mi★ Common | 10,560 ft | 10560 ft | 10560 ft |
3 mi★ Common | 15,840 ft | 15840 ft | 15840 ft |
4 mi | 21,120 ft | 21120 ft | 21120 ft |
5 mi★ Common | 26,400 ft | 26400 ft | 26400 ft |
6 mi★ Common | 31,680 ft | 31680 ft | 31680 ft |
7 mi | 36,960 ft | 36960 ft | 36960 ft |
8 mi★ Common | 42,240 ft | 42240 ft | 42240 ft |
9 mi | 47,520 ft | 47520 ft | 47520 ft |
10 mi★ Common | 52,800 ft | 52800 ft | 52800 ft |
11 mi | 58,080 ft | 58080 ft | 58080 ft |
12 mi★ Common | 63,360 ft | 63360 ft | 63360 ft |
How to Convert Miles to Feet
To convert miles to feet, multiply the length by the following conversion ratio: 5,280 feet/mile.
Since one mile is equal to 5,280 feet, you can use this simple formula to convert:
The length in feet is equal to the length in miles multiplied by 5,280.
For example, here's how to convert 1 miles to feet using the formula above.
How Many Feet Are in a Mile?
There are 5,280 feet in a mile, which is why we use this value in the formula above.
Our mile fraction and decimal calculator can convert miles and feet, and it automatically converts the results to US customary, imperial, and SI metric values.
Miles and feet are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Miles to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 63360 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 1 miles (mi) into fractional inches:
- Find the decimal inches result: Convert 1 mi to inches to get 63360 in.
- Separate the whole inches from the decimal part: Keep the whole number 63360 aside, leaving the decimal remainder 0.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Mile?
A mile is a unit of length equal to 1,609.344 meters (m), the base unit for length. Statute mile equal to 5,280 feet or 1,760 yards (1.609344 km). [1]
The mile is classified as a US customary and imperial unit of length. Miles can be abbreviated as mi; for example, 1 mile can be written as 1 mi.
One statute mile is defined as 5,280 feet or 1,760 yards, which equals exactly 1,609.344 meters (1.609344 kilometers).
In practice, miles (mi) are widely used across large-scale industrial, bulk, and macro-level length specifications within US customary and imperial workflows, engineering documentation, and technical data sheets.
What Is a Foot?
A foot is a US customary and imperial unit of length equal to 12 inches or 1/3 of a yard. Under the 1959 International Yard and Pound Agreement, one foot is legally defined as exactly 0.3048 meters (30.48 centimeters). [2]
Feet are widely used in the United States, Canada, and the United Kingdom for human height, building construction, real estate floor plans, and aviation altitude. Feet can be abbreviated as ft; for example, 1 foot can be written as 1 ft.
Feet can also be denoted using the ′ symbol, known as a prime (or a single quote ' for convenience). For example, 5 feet 10 inches is frequently written as 5′ 10″ or 5' 10".
Feet are measured using 12-inch rulers, carpenter's folding rules, 25-foot steel tape measures, and laser distance meters across residential framing, architecture, and surveying.
When converting length between miles (mi) and feet (ft), keep full floating-point precision (1 mi = 5,280 ft; 1 ft = 0.000189394 mi) during intermediate calculations and round only the final foot figure to match your instrument tolerance.
More Mile & Foot Conversions
Need to calculate in the opposite direction? Use our feet to miles converter (ft to mi) to switch your starting unit immediately. You can also explore related tools such as converting meters to feet, converting inches to feet, or converting miles to kilometers.
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Miles (mi) to Feet (ft)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Mile (Statute) (mi) & Foot (ft)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (mi to ft)