Meters to US Survey Feet Converter
Enter the length in meters below to convert it to us survey feet.
Convert Meters to US Survey Feet
Enter a value in meters (m) to convert to us survey feet (ft (US)).
Meters to US Survey Feet Conversion Chart (1–40 Continuous)
Continuous 1 to 40 meters lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Meters (m) | Decimal (ft (US)) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 m★ Common | 3.280833 ft (US) | 3 9/32 ft (US) | 3 1/4 ft (US) |
2 m★ Common | 6.561667 ft (US) | 6 9/16 ft (US) | 6 9/16 ft (US) |
3 m★ Common | 9.8425 ft (US) | 9 27/32 ft (US) | 9 13/16 ft (US) |
4 m | 13.123333 ft (US) | 13 1/8 ft (US) | 13 1/8 ft (US) |
5 m★ Common | 16.404167 ft (US) | 16 13/32 ft (US) | 16 3/8 ft (US) |
6 m★ Common | 19.685 ft (US) | 19 11/16 ft (US) | 19 11/16 ft (US) |
7 m | 22.965833 ft (US) | 22 31/32 ft (US) | 22 15/16 ft (US) |
8 m★ Common | 26.246667 ft (US) | 26 1/4 ft (US) | 26 1/4 ft (US) |
9 m | 29.5275 ft (US) | 29 17/32 ft (US) | 29 1/2 ft (US) |
10 m★ Common | 32.808333 ft (US) | 32 13/16 ft (US) | 32 13/16 ft (US) |
11 m | 36.089167 ft (US) | 36 3/32 ft (US) | 36 1/16 ft (US) |
12 m★ Common | 39.37 ft (US) | 39 3/8 ft (US) | 39 3/8 ft (US) |
How to Convert Meters to US Survey Feet
To convert meters to us survey feet, multiply the length by the following conversion ratio: 3.2808333 us survey feet/meter.
Since one meter is equal to 3.2808333 us survey feet, you can use this simple formula to convert:
The length in us survey feet is equal to the length in meters multiplied by 3.2808333.
For example, here's how to convert 1000 meters to us survey feet using the formula above.
How Many US Survey Feet Are in a Meter?
There are 3.2808333 us survey feet in a meter, which is why we use this value in the formula above.
Our meter fraction and decimal calculator can convert meters and us survey feet, and it automatically converts the results to US customary, imperial, and SI metric values.
Meters and us survey feet are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Meters to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 39370.07874 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 1000 meters (m) into fractional inches:
- Find the decimal inches result: Convert 1000 m to inches to get 39370.07874 in.
- Separate the whole inches from the decimal part: Keep the whole number 39370 aside, leaving the decimal remainder 0.07874.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0.07874 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Meter?
The meter (or metre) is the fundamental base unit of length in the International System of Units (SI), officially defined by the BIPM as the length of the path traveled by light in a vacuum during a time interval of 1/299,792,458 of a second. [1]
All metric units of length—from nanometers and millimeters to kilometers—are derived as decimal powers of the meter. Meters can be abbreviated as m; for example, 1 meter can be written as 1 m.
One meter is equal to 100 centimeters, 1,000 millimeters, or approximately 39.3700787 inches (3.28084 feet or 1.09361 yards).
Meters are measured using meter sticks, retractable steel tape measures, laser distance finders, and total station surveying instruments in construction, athletics, physics, and civil engineering.
What Is a US Survey Foot?
A us survey foot is a unit of length equal to 0.3048006 meters (m), the base unit for length. Geodetic US Survey foot defined as 1200/3937 meters (approx. 0.30480061 m). [2]
The us survey foot is classified as a US customary unit of length. US Survey Feet can be abbreviated as ft (US); for example, 1 us survey foot can be written as 1 ft (US).
When working with us survey feet (ft (US)) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, us survey feet (ft (US)) are widely used across standard length applications within US customary workflows, engineering documentation, and technical data sheets.
When converting length between meters (m) and us survey feet (ft (US)), keep full floating-point precision (1 m = 3.2808333 ft (US); 1 ft (US) = 0.3048006 m) during intermediate calculations and round only the final us survey foot figure to match your instrument tolerance.
More Meter & US Survey Foot Conversions
Need to calculate in the opposite direction? Use our us survey feet to meters converter (ft (US) to m) to switch your starting unit immediately. You can also explore related tools such as converting meters to feet, converting meters to yards, or converting centimeters to inches.
Convert from Meters
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Meters (m) to US Survey Feet (ft (US))
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Meter (m) & US Survey Foot (ft (US))
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (m to ft (US))