Feet to Dekameters Converter
Enter the length in feet below to convert it to dekameters.
Convert Feet to Dekameters
Enter a value in feet (ft) to convert to dekameters (dam).
Feet to Dekameters Conversion Chart (1–40 Continuous)
Continuous 1 to 40 feet lookup table with exact decimals and reduced nearest 1/64 fractions. Highlighted rows mark common shop and ruler values.
| Feet (ft) | Decimal (dam) | Fraction — Nearest 1/64 (Reduced) | Nearest 1/16 (Tape) |
|---|---|---|---|
1 ft★ Common | 0.03048 dam | 1/32 dam | 0 dam |
2 ft★ Common | 0.06096 dam | 1/16 dam | 1/16 dam |
3 ft★ Common | 0.09144 dam | 3/32 dam | 1/16 dam |
4 ft | 0.12192 dam | 1/8 dam | 1/8 dam |
5 ft★ Common | 0.1524 dam | 5/32 dam | 1/8 dam |
6 ft★ Common | 0.18288 dam | 3/16 dam | 3/16 dam |
7 ft | 0.21336 dam | 7/32 dam | 3/16 dam |
8 ft★ Common | 0.24384 dam | 1/4 dam | 1/4 dam |
9 ft | 0.27432 dam | 9/32 dam | 1/4 dam |
10 ft★ Common | 0.3048 dam | 5/16 dam | 5/16 dam |
11 ft | 0.33528 dam | 21/64 dam | 5/16 dam |
12 ft★ Common | 0.36576 dam | 23/64 dam | 3/8 dam |
How to Convert Feet to Dekameters
To convert feet to dekameters, multiply the length by the following conversion ratio: 0.03048 dekameters/foot.
Since one foot is equal to 0.03048 dekameters, you can use this simple formula to convert:
The length in dekameters is equal to the length in feet multiplied by 0.03048.
For example, here's how to convert 5 feet to dekameters using the formula above.
How Many Dekameters Are in a Foot?
There are 0.03048 dekameters in a foot, which is why we use this value in the formula above.
Our foot fraction and decimal calculator can convert feet and dekameters, and it automatically converts the results to US customary, imperial, and SI metric values.
Feet and dekameters are both units used to measure length. Keep reading to learn more about each unit.
How to Convert Feet to Fractional Inches (1/16″, 1/32″ & 1/64″)
Plain-language method for turning decimal inches into a standard tape-measure or machinist ruler fraction
Calculators give you a decimal number (such as 60 in), but tape measures and woodworking rulers are marked in binary fractions of an inch—most commonly 1/16″ on carpenter tapes, 1/32″ on fine woodworking rules, and 1/64″ on machinist scales.
Here is the step-by-step worked example for converting 5 feet (ft) into fractional inches:
- Find the decimal inches result: Convert 5 ft to inches to get 60 in.
- Separate the whole inches from the decimal part: Keep the whole number 60 aside, leaving the decimal remainder 0.
- Multiply the decimal part by your desired fraction denominator (16, 32, or 64) and round half up: Multiply 0 by 16, 32, or 64, then round to the nearest whole number (values ending in .5 round up).
- Reduce the fraction to lowest terms: If the rounded top number (numerator) is even, divide both top and bottom by 2 (or their Greatest Common Divisor) until the top number is odd, then combine with your whole inches.
What Is a Foot?
A foot is a US customary and imperial unit of length equal to 12 inches or 1/3 of a yard. Under the 1959 International Yard and Pound Agreement, one foot is legally defined as exactly 0.3048 meters (30.48 centimeters). [1]
Feet are widely used in the United States, Canada, and the United Kingdom for human height, building construction, real estate floor plans, and aviation altitude. Feet can be abbreviated as ft; for example, 1 foot can be written as 1 ft.
Feet can also be denoted using the ′ symbol, known as a prime (or a single quote ' for convenience). For example, 5 feet 10 inches is frequently written as 5′ 10″ or 5' 10".
Feet are measured using 12-inch rulers, carpenter's folding rules, 25-foot steel tape measures, and laser distance meters across residential framing, architecture, and surveying.
What Is a Dekameter?
A dekameter is a unit of length equal to 10 meters (m), the base unit for length. Metric unit equal to 10 meters. [2]
The dekameter is classified as a metric and SI-compatible unit of length. Dekameters can be abbreviated as dam; for example, 1 dekameter can be written as 1 dam.
In the metric system, "deka" is the standard SI prefix for tens, or 10¹. This makes the dekameter (dam) a convenient decimal multiple of the meter (m).
In practice, dekameters (dam) are widely used across standard length applications within SI metric workflows, engineering documentation, and technical data sheets.
When converting length between feet (ft) and dekameters (dam), keep full floating-point precision (1' = 0.03048 dam; 1 dam = 32.808399 ft) during intermediate calculations and round only the final dekameter figure to match your instrument tolerance.
More Foot & Dekameter Conversions
Need to calculate in the opposite direction? Use our dekameters to feet calculator to switch your starting unit immediately. You can also explore related tools such as converting dekameters to feet, converting feet to meters, or converting feet to inches.
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Length Metrology Standard — Feet (ft) to Dekameters (dam)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Foot (ft) & Dekameter (Decameter) (dam)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (ft to dam)