Stokes to Square Meters per Second Converter
Enter the kinematic viscosity in stokes below to convert it to square meters per second.
Convert Stokes to Square Meters per Second
Enter a value in stokes (St) to convert to square meters per second (m²/s).
Stokes to Square Meter per Second Conversion Table
Table showing various stokes measurements converted to square meters per second. Click any preset value or arrow to load it into the converter.
| Stokes (St) | Square Meters per Second (m²/s) |
|---|---|
| 1 St | 0.0001 m²/s |
| 2 St | 0.0002 m²/s |
| 5 St | 0.0005 m²/s |
| 10 St | 0.001 m²/s |
| 15 St | 0.0015 m²/s |
| 20 St | 0.002 m²/s |
| 25 St | 0.0025 m²/s |
| 30 St | 0.003 m²/s |
| 50 St | 0.005 m²/s |
| 75 St | 0.0075 m²/s |
How to Convert Stokes to Square Meters per Second
To convert stokes to square meters per second, multiply the kinematic viscosity by the following conversion ratio: 0.0001 square meters per second/stokes.
Since one stokes is equal to 0.0001 square meters per second, you can use this simple formula to convert:
The kinematic viscosity in square meters per second is equal to the kinematic viscosity in stokes multiplied by 0.0001.
For example, here's how to convert 10 stokes to square meters per second using the formula above.
How Many Square Meters per Second Are in a Stokes?
There are 0.0001 square meters per second in a stokes, which is why we use this value in the formula above.
Our stokes to square meter per second calculator automatically converts your kinematic viscosity measurements with full decimal and scientific precision across US customary, imperial, and SI metric standards.
Stokes and square meters per second are both units used to measure kinematic viscosity. Keep reading to learn more about each unit.
What Is a Stokes?
A stokes is a unit of kinematic viscosity equal to 1/10,000 of a square meter per second (0.0001 m²/s). CGS kinematic viscosity unit equal to 1 cm²/s (0.0001 m²/s). [1]
The stokes is classified as a metric and SI-compatible unit of kinematic viscosity. Stokes can be abbreviated as St; for example, 1 stokes can be written as 1 St.
When working with stokes (St) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, stokes (St) are widely used across fine-tolerance laboratory, analytical, and micro-scale kinematic viscosity measurements within SI metric workflows, engineering documentation, and technical data sheets.
What Is a Square Meter per Second?
Coherent SI unit of kinematic viscosity. It serves as a primary reference unit for measuring kinematic viscosity across scientific and practical applications. [2]
The square meter per second is classified as an International System of Units (SI) unit of kinematic viscosity. Square Meters per Second can be abbreviated as m²/s; for example, 1 square meter per second can be written as 1 m²/s.
As the primary coherent reference unit for kinematic viscosity in this category, all other kinematic viscosity units are mathematically anchored to the square meter per second (m²/s).
In practice, square meters per second (m²/s) are widely used across standard kinematic viscosity applications within International System of Units (SI) workflows, engineering documentation, and technical data sheets.
When converting kinematic viscosity between stokes (St) and square meters per second (m²/s), keep full floating-point precision (1 St = 0.0001 m²/s; 1 m²/s = 10,000 St) during intermediate calculations and round only the final square meter per second figure to match your instrument tolerance.
More Stokes & Square Meter per Second Conversions
Need to calculate in the opposite direction? Use our square meters per second to stokes converter (m²/s to St) to switch your starting unit immediately. You can also explore related tools such as converting square millimeters per second to square meters per second, converting centistokes to square meters per second, or converting square meters per second to square millimeters per second.
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Viscosity - Kinematic Metrology Standard — Stokes (St) to Square Meters per Second (m²/s)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Stokes (St) & Square Meter per Second (m²/s)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (St to m²/s)