Square Millimeters per Second to Stokes Converter
Enter the kinematic viscosity in square millimeters per second below to convert it to stokes.
Convert Square Millimeters per Second to Stokes
Enter a value in square millimeters per second (mm²/s) to convert to stokes (St).
Square Millimeter per Second to Stokes Conversion Table
Table showing various square millimeter per second measurements converted to stokes. Click any preset value or arrow to load it into the converter.
How to Convert Square Millimeters per Second to Stokes
To convert square millimeters per second to stokes, multiply the kinematic viscosity by the following conversion ratio: 0.01 stokes/square millimeter per second.
Since one square millimeter per second is equal to 0.01 stokes, you can use this simple formula to convert:
The kinematic viscosity in stokes is equal to the kinematic viscosity in square millimeters per second multiplied by 0.01.
For example, here's how to convert 5 square millimeters per second to stokes using the formula above.
How Many Stokes Are in a Square Millimeter per Second?
There are 0.01 stokes in a square millimeter per second, which is why we use this value in the formula above.
Our square millimeter per second to stokes calculator automatically converts your kinematic viscosity measurements with full decimal and scientific precision across US customary, imperial, and SI metric standards.
Square Millimeters per Second and stokes are both units used to measure kinematic viscosity. Keep reading to learn more about each unit.
What Is a Square Millimeter per Second?
A square millimeter per second is a unit of kinematic viscosity equal to 1/1,000,000 of a square meter per second (0.000001 m²/s). Numerically identical to 1 centistokes (1 mm²/s = 1 cSt = 10⁻⁶ m²/s). [1]
The square millimeter per second is classified as a metric and SI-compatible unit of kinematic viscosity. Square Millimeters per Second can be abbreviated as mm²/s; for example, 1 square millimeter per second can be written as 1 mm²/s.
When working with square millimeters per second (mm²/s) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, square millimeters per second (mm²/s) are widely used across fine-tolerance laboratory, analytical, and micro-scale kinematic viscosity measurements within SI metric workflows, engineering documentation, and technical data sheets.
What Is a Stokes?
A stokes is a unit of kinematic viscosity equal to 1/10,000 of a square meter per second (0.0001 m²/s). CGS kinematic viscosity unit equal to 1 cm²/s (0.0001 m²/s). [2]
The stokes is classified as a metric and SI-compatible unit of kinematic viscosity. Stokes can be abbreviated as St; for example, 1 stokes can be written as 1 St.
When working with stokes (St) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.
In practice, stokes (St) are widely used across fine-tolerance laboratory, analytical, and micro-scale kinematic viscosity measurements within SI metric workflows, engineering documentation, and technical data sheets.
When converting kinematic viscosity between square millimeters per second (mm²/s) and stokes (St), keep full floating-point precision (1 mm²/s = 0.01 St; 1 St = 100 mm²/s) during intermediate calculations and round only the final stokes figure to match your instrument tolerance.
More Square Millimeter per Second & Stokes Conversions
Need to calculate in the opposite direction? Use our stokes to square millimeters per second calculator to switch your starting unit immediately. You can also explore related tools such as converting stokes to square millimeters per second, converting square meters per second to stokes, or converting square millimeters per second to square meters per second.
Convert from Square Millimeters per Second
Frequently Asked Questions
References
- [1]NIST OWM StandardNIST OWM (SI Units — Length)·Viscosity - Kinematic Metrology Standard — Square Millimeters per Second (mm²/s) to Stokes (St)
- [2]BIPM SpecificationBIPM (SI Base Unit: Metre (m))·Unit Specifications: Square Millimeter per Second (mm²/s) & Stokes (St)
- [3]NIST HB 133 ReferenceNIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (mm²/s to St)