How do you convert volts per centimeter to volts per meter?

To convert volts per centimeter (V/cm) to volts per meter (V/m), multiply the measurement in volts per centimeter by 100 (volts per meter = volts per centimeter × 100).

What is 10 volts per centimeter in volts per meter?

10 volts per centimeter (10 V/cm) is equal to 1,000 volts per meter (1,000 V/m).

Which is larger, 1 volt per centimeter (V/cm) or 1 volt per meter (V/m)?

One volt per centimeter (V/cm) is larger than one volt per meter (V/m). Specifically, 1 V/cm contains 100 V/m, whereas 1 V/m is 0.01 V/cm.

How do I convert back from volts per meter (V/m) to volts per centimeter (V/cm)?

To reverse the calculation from V/m to V/cm, multiply your volt per meter value by the inverse factor 0.01 (or divide by 100). You can also click the Swap button in the tool above to flip directions in one click.

How many decimal places should I round V/cm to V/m results to?

For everyday comparisons and quick estimates, rounding to 2 decimal places is usually sufficient (for example, 10 V/cm ≈ 1,000.00 V/m). For engineering, laboratory, or machining specifications, select 4 or 6 decimals—or Scientific (10ⁿ) mode—in the calculator toolbar above.

Volts per Centimeter to Volts per Meter Converter

Enter the electric field strength in volts per centimeter below to convert it to volts per meter.

Volts per Meter to Volts per Centimeter (V/m → V/cm)

Convert Volts per Centimeter to Volts per Meter

Enter a value in volts per centimeter (V/cm) to convert to volts per meter (V/m).

Value (V/cm)

From

Result

•

1,000volts per meter

10 V/cm = 1,000 V/m

Result updates automatically

Get Widget

Suggested Conversions

Reference:NIST OWM (SI Units — Length)

[1–3] ↓

Volt per Centimeter to Volt per Meter Conversion Table

Table showing various volt per centimeter measurements converted to volts per meter. Click any preset value or arrow to load it into the converter.

Volts per Centimeter (V/cm)	Volts per Meter (V/m)
1 V/cm	100 V/m
2 V/cm	200 V/m
5 V/cm	500 V/m
10 V/cm	1,000 V/m
15 V/cm	1,500 V/m
20 V/cm	2,000 V/m
25 V/cm	2,500 V/m
30 V/cm	3,000 V/m
50 V/cm	5,000 V/m
75 V/cm	7,500 V/m

How to Convert Volts per Centimeter to Volts per Meter

To convert volts per centimeter to volts per meter, multiply the electric field strength by the following conversion ratio: 100 volts per meter/volt per centimeter.

Since one volt per centimeter is equal to 100 volts per meter, you can use this simple formula to convert:

volts per meter = volts per centimeter × 100

The electric field strength in volts per meter is equal to the electric field strength in volts per centimeter multiplied by 100.

For example, here's how to convert 10 volts per centimeter to volts per meter using the formula above.

volts per meter = (10 V/cm × 100) = 1,000 V/m

How Many Volts per Meter Are in a Volt per Centimeter?

There are 100 volts per meter in a volt per centimeter, which is why we use this value in the formula above.

1 V/cm = 100 V/m|1 V/m = 0.01 V/cm

Our volt per centimeter to volt per meter calculator automatically converts your electric field strength measurements with full decimal and scientific precision across US customary, imperial, and SI metric standards.

Volts per Centimeter and volts per meter are both units used to measure electric field strength. Keep reading to learn more about each unit.

What Is a Volt per Centimeter?

A volt per centimeter is a unit of electric field strength equal to 100 volts per meter (V/m), the base unit for electric field strength. Equal to 100 V/m. [1]

The volt per centimeter is classified as a metric and SI-compatible unit of electric field strength. Volts per Centimeter can be abbreviated as V/cm; for example, 1 volt per centimeter can be written as 1 V/cm.

When working with volts per centimeter (V/cm) in formulas or technical specifications, always verify whether your target system uses SI metric, US customary, or British imperial standards.

In practice, volts per centimeter (V/cm) are widely used across standard electric field strength applications within SI metric workflows, engineering documentation, and technical data sheets.

Learn more about volts per centimeter in our Electric Field Strength Converter.

What Is a Volt per Meter?

SI unit of electric field strength (1 V/m = 1 N/C). It serves as a primary reference unit for measuring electric field strength across scientific and practical applications. [2]

The volt per meter is classified as an International System of Units (SI) unit of electric field strength. Volts per Meter can be abbreviated as V/m; for example, 1 volt per meter can be written as 1 V/m.

As the primary coherent reference unit for electric field strength in this category, all other electric field strength units are mathematically anchored to the volt per meter (V/m).

In practice, volts per meter (V/m) are widely used across standard electric field strength applications within International System of Units (SI) workflows, engineering documentation, and technical data sheets.

Learn more about volts per meter in our Electric Field Strength Converter.

When converting electric field strength between volts per centimeter (V/cm) and volts per meter (V/m), keep full floating-point precision (1 V/cm = 100 V/m; 1 V/m = 0.01 V/cm) during intermediate calculations and round only the final volt per meter figure to match your instrument tolerance.

More Volt per Centimeter & Volt per Meter Conversions

Need to calculate in the opposite direction? Use our volts per meter to volts per centimeter converter (V/m to V/cm) to switch your starting unit immediately. You can also explore related tools such as converting kilovolts per meter to volts per meter, converting kilovolts per centimeter to volts per meter, or converting volts per meter to kilovolts per meter.

Convert from Volts per Centimeter

Convert to Volts per Meter

Frequently Asked Questions

There are 100 volts per meter (V/m) in 1 volt per centimeter (V/cm). Conversely, 1 volt per meter (V/m) is equal to 0.01 volts per centimeter (V/cm).

Electric Field Strength Converter

Quick Info

Direct Factor: 1 volt per centimeter (V/cm) equals 100 volts per meter (V/m).
Inverse Factor: 1 volt per meter (V/m) equals 0.01 volts per centimeter (V/cm).
Formula: volts per meter = volts per centimeter × 100.
Verified Precision: Anchored to official NIST SP 811 and ISO/IEC 80000 standards.

Units Comparison

Volt per Centimeter (V/cm)

Equal to 100 V/m.

Volt per Meter (V/m)

SI unit of electric field strength (1 V/m = 1 N/C).

Kilovolt per Meter (kV/m)

Equal to 1,000 V/m.

References

[1]NIST OWM · SI Units — Length
Source
[2]BIPM · SI Base Unit: Metre (m)
Source
[3]NIST HB 133 · NIST Handbook 133 (2019 Ed.)
Source

Related Categories

Add This Calculator to Your Site

Free HTML widget · 4 embed formats

Embed the interactive Volts per Centimeter to Volts per Meter converter on your blog, classroom, or documentation page.

Customize & Get Embed Code

References

NIST · BIPM · ISO

[1]
NIST OWM (SI Units — Length)·Electric Field Strength Metrology Standard — Volts per Centimeter (V/cm) to Volts per Meter (V/m)
NIST OWM Standard
[2]
BIPM (SI Base Unit: Metre (m))·Unit Specifications: Volt per Centimeter (V/cm) & Volt per Meter (V/m)
BIPM Specification
[3]
NIST HB 133 (NIST Handbook 133 (2019 Ed.))·Conversion Factors & Mathematical Basis (V/cm to V/m)
NIST HB 133 Reference

Measurement Navigator78 Categories9 Scientific Domains

Browse All 78 Measurement Categories

A–Z Directory →Sitemap

Electricity ConvertersElectrical engineering and electrostatic converters for charge, linear/surface/volume charge density, current, linear/surface current density, electric field, voltage potential, resistance, resistivity, conductance, conductivity, capacitance, and inductance.

Electric Charge

8 units

Linear Charge Density

5 units

Surface Charge Density

5 units

Volume Charge Density

5 units

Electric Current

4 units

Linear Current Density

5 units